Control units DPE4 through DPE16

Thanks to clear, well-laid-out and full-colour menu guidance, the current needle positions and the incoming and outgoing signals are always recognizable. The DPE is operated using a touchscreen. The control unit can be configured based on the application. Storage locations for mould data are available for saving the settings.

Operation of up to 16 stepper motors to drive shut-off needles
Encoder signals are read out to ensure correct positioning
Cascading of connected needles is easy to implement
Valve gate control as a closed control circuit
Log of all actions and events in internal memory
Data exchange via USB interface
Individually adjustable needle positions
Needle adjustment in the range of 1/100 mm
Simultaneous closure of valve gates possible from different positions
Fully automated process

The interface cable for the injection moulding machine (open on one end) is included with the scope of supply.
The cables from the control unit to the stepper motors are not included in the scope of supply.

Data sheet: Control units DPE4 through DPE16.pdf

Catalogue Regulation and control techology.pdf

To view documents, you may require additional software, such as Adobe Acrobat Reader, under certain circumstances. This can be downloaded free of charge under www.adobe.de

You can find more information in the Service area under Downloads.

Control units DPE4 through DPE16

Single needle drive for stepper motor type SMA

Product inquiry Control units DPE4 through DPE16